Sidemount Buoyancy Compensators

Born out of necessity for the deepest and toughest cave explorations, and used the world over by sidemount divers at every level, the Stealth Classic is the most flexible sidemount system in the world. The wing comes in either standard or redundant bladder setups, offers 16kg (36lbs) of lift, and can be positioned nearly anywhere on the body. Max cylinder capacity: 4

The battleship of XDeep's sidemount lineup, the Stealth Tec. has 19kg (42lbs) of lift capacity, comes in either a standard or redundant setup, and is made for the most demanding technical dives. Max cylinder capacity: 6 to 8

With it's 13kg (28lbs) of lift, deluxe adjustable harness, and availability in both standard or redundant bladder setups, the Stealth Rec. is perfect for warm waters, and all levels of recreational sidemount divers. Max cylinder capacity: 2

Same as the regular Stealth 2.0 Classic, only with an added second bladder for built in redundancy.

Same as the regular Stealth 2.0 Tec., only with an added second bladder for built in redundancy.

Same as the regular Stealth 2.0 Rec., only with an added second bladder for built in redundancy.

This is the wing only.

This is the wing only.

This is the wing only.

This is the wing only.

This is the wing only.

This is the wing only.

The foundation of XDeep's sidemount system, the Stealth 2.0 harness has become renowned throughout the diving community for its revolutionary design and performance. Different thicknesses of webbing are used for the shoulders, waist, and crotch strap, and the spine weight pockets keep the weight exactly where it should be, center-lined and trimmed.

The standard butt pouch is storage simplicity at its finest. Made for the demands of cave exploration, this pouch is streamlined so it won't get caught on anything, and tough enough to be scraped across any surface. It has two pockets, a large primary pocket on top and a small secondary pocket up front, with a window to see items inside or if you accidentally left your backup light on, and it is large enough for slates, wet notes, spare bungee, tools, and more.

The expandable butt pouch is large enough to carry anything and everything you need for deep technical exploration, and then some! It has a massive main compartment on top, a small front pocket, and an emergency pocket in the rear, and can accommodate a mask, wet notes, slates, SMB's and reels, carabiners and spare double-enders, spare bungee, tools, backup lights, and more.

XDeep's spine weight pouches are praised the world over for being the best designed weight pocket system ever conceived. They keep the weight exactly where it needs to be, closest to your centerline so your weight and moment are not changed, and right on top of your body's natural center of gravity, so your trim and buoyancy are perfect.

Size S: Holds two 2kg-4kg weights.

XDeep's spine weight pouches are praised the world over for being the best designed weight pocket system ever conceived. They keep the weight exactly where it needs to be, closest to your centerline so your weight and moment are not changed, and right on top of your body's natural center of gravity, so your trim and buoyancy are perfect.

Size M: Holds four 2kg-4kg weights.

XDeep's spine weight pouches are praised the world over for being the best designed weight pocket system ever conceived. They keep the weight exactly where it needs to be, closest to your centerline so your weight and moment are not changed, and right on top of your body's natural center of gravity, so your trim and buoyancy are perfect.

Size D: Holds four 4kg weights and weights can be doubled up.

These trim weight pockets can be placed nearly anywhere you need them to be. The incorporate integrated tri-glides, and a centered molle loop for mounting and staying in place.

Size M: Holds up to a single 3kg weight each.

These trim weight pockets can be placed nearly anywhere you need them to be. The incorporate integrated tri-glides, and a centered molle loop for mounting and staying in place.

Size L: Hold two 3kg weights each.

An easily attachable butt plate with incorporated rails that can mount to all XDeep Stealth 2.0 sidemount harnesses.

This is a fully customizable and completely independently designed sidemount system. The BC has a 16kg lift capacity, can be setup in either left or right side hose configuration, is made from 1000D Cordura, and is extremely abrasion and cut resistant. The harness can be setup in a "Y" or "H" configuration, and is fully customizable to the users needs.

This is the frame of the sidemount harness. All parts are marine-grade stamped stainless steel, so they are light, very strong, and rust-proof.

These parts of the harness make up the shoulder straps and the waist straps, either individually or combined, and can also be used for the spine and crotch strap if desired. The webbing is thick, diving-grade webbing, that's 2" (50mm) wide, extremely durable, and available in various stiffnesses.

These parts of the harness make up the shoulder straps and the waist straps, either individually or combined, and can also be used for the spine and crotch strap if desired. The webbing is thick, diving-grade webbing, that's 2" (50mm) wide, extremely durable, and available in various stiffnesses.

This part of the harness makes up the spine and crotch strap combined, or just the crotch strap independently. The webbing is thick, diving-grade webbing, that's 2" (50mm) wide.

This is the BC only. It has a 16kg lift capacity, can be setup in either left or right side hose configuration, is made from 1000D Cordura, and is extremely abrasion and cut resistant.

This is the primary rigging for two cylinders (tanks). Secondary rigging, consisting of paracord and double-ender bolt snaps, will be included with this part of the completed system.

This is an alternative 1000D Cordura weight pocket capable of holding 16kg (35lbs) of total weight. It is mounted on the spine of the sidemount harness, and provides an alternative to using individual weight pockets.

This is a standard, extra large utility pouch made from 1000D Cordura. It is expandable, and comes in Black, Pink, or Multicam versions.

Spare Bungee. Choices include either 4mm, 6mm, or 8mm thicknesses. 4mm bungee is typically used for the sides of the wing to wrap it around the body, as well as for use as retention loops and for the LPIH. While 6mm and 8mm bungee is typically used for the tank loops. Choice of thickness is based on user preference, design setup (continuous, loop, two-piece continuous, etc.), and needs.

Made from marine grade stainless steel, these toothed tri-glides are used replace the standard tri-glides that come with harnesses as they don't slip or move once in place. They are necessary for use with both shoulder and fore and aft waist belt d-rings, and can even be used as retainers for weight pockets and other accessories mounted on harnesses.

Made from marine grade stainless steel, these d-rings are 50mm (2") across the inside, and are necessary for a second set of waist d-rings on sidemount harnesses, as additional mounting points as desired, or as replacements.

Made from marine grade stainless steel, these d-rings are 50mm (2") across the inside, and are necessary for shoulder d-rings on sidemount harnesses, as additional mounting points as desired, or as replacements.