Accessories

---

This super bright 1000 lumen multi-function push button light is slim yet powerful. It has a recessed switch with an indicator that lights up to avoiding power level surprises. The light has 6 modes, including 3 brightness levels and 3 strobe settings. Powered by a single 18650 rechargeable battery. Charger included.

This is a standard wrist-mounted compass, essential for all divers to have and use.

This is a standard wrist-mounted compass, essential for all divers to have and use.

These Surface Marker Buoys are available in 36in (91cm), 45in (114cm), and 72in (182cm) lengths. They include a flapper valve on the bottom, an over-pressurization relief valve, an LPH/manual inflation valve, Solas reflective strips, a chem light holder, a stainless steel D-ring, and velcro to secure them when stowed.

These Surface Marker Buoys are  140cm (55in) in length. They include an over-pressurization relief valve, an LPH/manual inflation valve, Solas reflective strips, a chem light holder, a retention loop, and bungee to secure them when stowed.

These Surface Marker Buoys are  140cm (55in) in length. They include an over-pressurization relief valve, an LPH/manual inflation valve, Solas reflective strips, a chem light holder, a retention loop, and bungee to secure them when stowed.

These Surface Marker Buoys are  90cm (35in) in length. They include an over-pressurization relief valve, an LPH/manual inflation valve, Solas reflective strips, a chem light holder, a retention loop, and bungee to secure them when stowed.

These Surface Marker Buoys are  140cm (55in) in length. They include an open bottom, Solas reflective strips, a chem light holder, a retention loop, and bungee to secure them when stowed.

These Surface Marker Buoys are  140cm (55in) in length. They include an open bottom, Solas reflective strips, a chem light holder, a retention loop, and bungee to secure them when stowed.

Small and low-profile, the Hog spool fits nicely out of the way in a pocket or clipped off to a D-ring. The holes in the side allow for clipping in a double ended snap anywhere along the perimeter of the spool to keep the line tight when not in use. Made of Delrin (ABS plastic), finger spools are simple to use and virtually indestructible. Comes standard with a large stainless double ender bolt snap, and in either 20m (66ft), 30m (100ft), or 45.7m (150ft) lengths of High Visibility ORANGE line.

This is a technical reel for wreck penetration, caving, surveys, or marking use. It comes in either 60m (200ft), or 121m (400ft) lengths of ORANGE caving line, designed for hardcore use.

From sizes small to extra large, these are heavy-duty, stainless steel swivel bolt snap made for diving use.

Available in 3.5in (9cm) or 4in (10.1cm), these are heavy duty stainless steel double-ended bolt snap made for diving use.

11cm (4.3'') 316 Stainless Steel Bolt Snap.

316 Stainless Steel Double-Ender Bolt Snap with a total length of: 10.8cm (4.25").

Extra Large 316 Stainless Steel Swivel Bolt Snap for sidemount use.

Small 316 Stainless Steel Swivel Bolt Snap for regulator hose use.

Small 316 Stainless Steel Double-Ended Bolt Snap.

These triglides feature an incorporated, fixed D-ring and an accessory slot on the sides. When paired with a D-ring through the webbing, these make the perfect tech harness or sidemount harness accessories.

For use on the waist straps of your harness, they have a dimension of 10.5 cm x 3.8 cm (4.13" x 1.5"), and made of 304 stainless steel.

For use on the waist straps of your harness, and are made of 304 stainless steel.

Made of 304 stainless steel, these webbing plates are designed to hold any batter or secure a number of other small accessories or items to the harness webbing.

These extremely dense, high-grade rubber rings come as a pair, and are XDeep's primary sliding D-ring option.

Made for 2" (50mm) webbing, these Sliding D-ring sets are made of 304 stainless steel, and are TIG welded for superior strength.

Made for 2" (50mm) webbing, these harness D-rings are made of 304 stainless steel, have a thickness of ø5mm (0.2"), a bent angle of 25°, and are TIG welded for superior strength.

Made for 2" (50mm) webbing, these harness D-rings are made of 304 stainless steel, have a thickness of ø5mm (0.2"), and are TIG welded for superior strength.

Screws on to your DIN configured 1st stage regulator to allow it to be mounted to an A-clamp (Yoke) tank valve.

Used to measure the intermediate pressure of any regulator. Great for regular maintenance and field diagnostics. This small gauge plugs right into any standard low pressure inflator hose. Because it is compact and lightweight, the gauge fits easily in a save-a-dive kit or tool bag.

Used to measure the pressure of a dive cylinder, generally prior to accepting the cylinder for rental or use. This gauge attaches to any standard tank valve equipped with wither a Yoke or DIN fitting. Easily in a save-a-dive kit or tool bag. Available in either Yoke or DIN.

Fits onto any second stage regulator, and used as a replacement for the standard mouthpiece that comes with it. Available in All Black, Red, Blue, and Yellow colors.

This is a replacement strap for nearly any mask. If your mask strap breaks, simply remove the old strap, and attach this soft silicone strap to continue the dive trip.

Commonly used by divers of all types for quick notes and messages underwater.

Commonly used by Dive Instructors, Divemasters, and other professionals for quick notes and messages underwater.

Commonly used by Dive Instructors, Divemasters, Technical Divers, and other dive professionals for dive plans, deco plans, and quick notes and messages underwater. Available in Black, Pink, Digital Camo, and Blue Camo.

Perfect fo your Save-a-Dive bag, this multi-tool includes the most common tools used for rapid field repairs, adjustments, and hose changes.